undefined
+
  • undefined

One-component polyurethane building structure sealant-(Schnaika F1)

The development of the product starts from the market demand and the understanding and analysis of the problems existing in the building doors and windows, such as energy saving and environmental protection, sound insulation and noise reduction, strong ultraviolet resistance, and catering to the green and healthy theme of the new era.

Classification:

Polyurethane sealant

info@chinacuishi.com

Product inquiry
Related Products
  • Product Description

  • Shi Nicka F1 polyurethane building structural adhesive, neutral, moisture curing, and the curing process is non-toxic and tasteless, with good adhesion to the surface of building materials. It has good weather resistance, elasticity and low temperature resistance, water resistance and strong smoke resistance.

    Performance parameters:

    Model F1 Elongation at break ≧ 400
    Appearance Black, white, gray paste Shear strength Mpa ≧ 1.0
    Table dry time min ≦ 120 Cohesion at constant extension ≦ 10%
    Extrudability ml/min ≧ 100 Sag mm 0
    Density g/cm3 ～1.2 Low temperature property ℃ No fracture at -45 ℃
    Hardness HA 30-50 Recommended construction temperature ℃ 10~40 ℃
    Tensile strength Mpa ≧ 3 Service temperature ℃ -45~90 ℃

    Product Features:

    1, one component, good thixotropy, convenient construction;
    2. High elasticity and strong adhesion;
    3, water resistance, oil resistance, aging resistance;
    4, no solvent, no shrinkage after curing volume;
    5. It has good adhesion with the substrate, and has no corrosion or pollution to the substrate.



    Product use:

    Stone, aluminum plate, glass curtain wall structure bonding, lighting ceiling, metal structure engineering bonding and sealing.

    Construction attention:

    1. Please carefully check the relevant logo of the sealant product before use.
    2. Keep the joint surface clean, dry and remove all kinds of oil stains and dust.
    3, according to the need to choose the company's supporting cleaning activator treatment or coated with appropriate primer.
    4, with manual or pneumatic gun coating construction, in the table dry time quickly bonding.
    5, in the temperature of 10-40 ℃,RH in 65%-75% environment construction is the best.
    6. Uncured A8 can be removed from tools or equipment with cleaning agent. Once cured, it can only be removed mechanically. Hands and exposed skin should be cleaned with suitable industrial hand sanitizer and water immediately after gluing, do not use solvents.




    Packaging storage:

    310ml aluminum tube, 400ml soft bag, 600ml soft bag. Storage in dry environment below 25 ℃, valid for 9 months, flexible packaging for 6 months.

     

Tag:

Product inquiry

Submission

Recommended Products